ST6018
Steppermotor Nema 24
High-torque stepper motor in size NEMA 24 (60 mm) with 1.8° step angle (full step). This stepper motor is slightly larger (flange size 60x60 mm) than the stepper motors of the ST5918 series, but offers a markedly higher power output and an 8 mm shaft with the same hole pattern. Available in five lengths and a variety of versions.
ST6018 Product Overview
ST6018 Product Overview
| Article | Nema | Size | Holding Torque | Resolution | Current per Winding | Length "A" | CAD |
|---|---|---|---|---|---|---|---|
| ST6018X2008-A | 24 | 60 mm | 106.07 Ncm | 1.8 °/step | 1.41 A | 47 mm | .stp |
| ST6018X2008-B | 24 | 60 mm | 106.07 Ncm | 1.8 °/step | 1.41 A | 47 mm | .stp |
| ST6018X3008-A | 24 | 60 mm | 110.31 Ncm | 1.8 °/step | 2.12 A | 47 mm | .stp |
| ST6018X3008-B | 24 | 60 mm | 110.31 Ncm | 1.8 °/step | 2.12 A | 47 mm | .stp |
| ST6018M2008-A | 24 | 60 mm | 195.16 Ncm | 1.8 °/step | 1.41 A | 56 mm | .stp |
| ST6018M2008-B | 24 | 60 mm | 195.16 Ncm | 1.8 °/step | 1.41 A | 56 mm | .stp |
| ST6018M3008-A | 24 | 60 mm | 165.46 Ncm | 1.8 °/step | 2.12 A | 56 mm | .stp |
| ST6018M3008-B | 24 | 60 mm | 165.46 Ncm | 1.8 °/step | 2.12 A | 56 mm | .stp |
| ST6018K2008-A | 24 | 60 mm | 212.13 Ncm | 1.8 °/step | 1.41 A | 67 mm | .stp |
| ST6018K2008-B | 24 | 60 mm | 212,13 Ncm | 1.8 °/step | 1.41 A | 67 mm | .stp |
| ST6018L3008-A | 17 | 42 mm | 353.55 Ncm | 1.8 °/step | 2.12 A | 88 mm | .stp |
| ST6018L3008-B | 17 | 42 mm | 353.55 Ncm | 1.8 °/step | 2.12 A | 88 mm | .stp |
| ST6018D4508-A | 17 | 42 mm | 400.22 Ncm | 1.8 °/step | 3.18 A | 111 mm | .stp |
| ST6018D4508-B | 17 | 42 mm | 400.22 Ncm | 1.8 °/step | 3.18 A | 111 mm | .dfx |